DOCSIS v3 - Cisco Data over Cable Service Interface Specification

Networking/Server/Operating Systems
Schedules
Optional
  LearnITAnytime Online Subscription (1 Year Subscription - $195.00)
  IT Online Library (1 Year Subscription - $1595.00)
  Private Mentoring 3 Hours ($225)
Quantity
If quantity is more than 1, Please add all Attendees' Names /Voucher #/ Learning Credit below separated with a comma. If not specified, we will contact you prior to the class start date. Special Instructions

Description

This Cisco Data Over Cable Service Interface Specification (DOCSIS), Instructor Led course covers key CMTS standards and concepts from DOCSIS 1.x through to 3.0. It provides hands-on DOCSIS expertise, and establishes important foundational knowledge for configuring bi-directional channel bonded services and other advanced-service technologies. While implementing DOCSIS services on the Cisco uBR10012 are the focus of this course, most of the learning experiences also apply to other Cisco CMTSs. The course includes lab activities to reinforce the key learning objectives.

Objectives

Upon completing this course, the learner will be able to meet these overall objectives:

  • Describe RF Networking Concepts when applied to the MSO environment
  • Explain and observe DOCSIS modem registration
  • Identify the pre-DOCSIS 3.0 technology and deployment foundation underpinning current DOCSIS 3.0 downstream channel bonding
  • Describe the component parts of the DOCSIS 3.0 specification set and explain primary aspects in block-diagram form
  • Explain modular and integrated CMTS concepts and how they relate to DOCSIS 3.0
  • Relate downstream channel bonding terms and acronyms to Cisco uBR10012 downstream channel bonding hardware and software releases
  • Identify Cisco uBR10012 hardware combinations using 20v20 and 3G60 required for downstream channel bonding
  • Configure and verify Cisco uBR10012 for downstream channel bonding operations in an I-CMTS configuration
  • Configure and verify Cisco uBR10012 for downstream channel bonding operations in an M-CMTS configuration using RFGW10, DS384 and 3G60 hardware
  • Configure necessary third-party DOCSIS 3.0 components such as the Symmetricon DTI server and gain knowledge necessary to recognize the role of any third-party components in a customer's M-CMTS design
  • Use new Cisco uBR10012 features and featurettes for best system performance in mixed DOCSIS 1.x/2.0 and DOCSIS 3.0 downstream channel-bonded environments
  • Use lessons learned from earlier worldwide downstream channel bonding deployments
  • Describe next steps in channel bonding that build upon Cisco uBR10012 downstream channel bonding and enable still more advanced services

Prerequisites

The knowledge and skills that a learner must have before attending this course are as follows:

  • Students should have knowledge and experience with the Cisco IOS Command Line Interface (CLI)

Who Should Attend

This course is designed for technical professionals who need to know how to deploy Cisco CMTS and associated equipment. The primary audience for this course includes:

  • Cable Operator Network Operation Center personnel
  • System Engineer/ Integrator/Solutions support personnel
  • Channel partners, resellers

Outline

    Module 1 - RF Networks
    Module 2 - Introduction to DOCSIS
    Module 3 - uBR10012
    Module 4 - RFGW 1 and RFGW 10
    Module 5 - DOCSIS 3.0 Specification Overview
    Module 6 - DOCSIS 3.0 Theory of Operation and CMTS Architecture
    Module 7 - Deploying Integrated CMTS
    Module 8 - Deploying Modular CMTS
    Module 9 - DOCSIS 3.0 Features
    Module 10 - Troubleshooting
    Module 11 - IPv6

    Lab Outline

      Lab 1: Cable Modem Registration
      Lab 2: Initial MAC Domain Configuration
      Lab 3: I-CMTS Downstream Channel Bonding
      Lab 4: I-CMTS Upstream Channel Bonding
      Lab 5: M-CMTS Downstream Channel Bonding
      Lab 6: M-CMTS Upstream Channel Bonding
      Lab 7: M-CMTS with WSPA and 3GSPA
      Lab 8: M-CMTS Channel Bonding with RFGW1
      Lab 9: Configuring DOCSIS Load Balancing
      Lab 10: Configuring DOCSIS Load Balancing Based on Utilization
      Lab 11: Troubleshooting